What happens if the power goes out while I am firing?
- If the power goes off during the Delay countdown, the controller will remember where it was when the power shut off. When the power comes back on, it will continue with the countdown from this point.
- If the power goes off and the temp is below 140°F, the display will read PF when the power comes back on and the kiln will not be firing.
- If the power goes off and the temp is over 140°F, when the power comes back on the kiln will continue the firing so long as it has not cooled more than 250°F.
- If it has cooled more than 250°F the display will read "PF" when the power comes back on and the kiln will not be firing. Press ENTER, then START to continue firing. Press the REVIEW PROG to check the program.
- If it has not cooled more than 250° F the display will flash "ERRP" while it fires. Press ENTER to remove the "ERRP" code.
November 21, 2024
