December 22, 2024
KNOWLEDGEBASE KNOWLEDGEBASE Support> Knowledgebase How to add soak to or reprogram a DynaTrol during a firing Change of Program During Firing: When firing you can alter the program anytime. You must press START/STOP, then reprogram, then press “Start”. The Dynatrol will automatically take the current temperature into consideration and start back up at that point in the program. If you attempt to do this right at the end of a firing, the amount of time it takes to reprogram is not accounted for by the Dynatrol. If more than a few minutes go by, the temperature displayed may not accurately represent the amount of heat work taking place in the kiln. Another reason to fire with witness cones.

December 22, 2024

KNOWLEDGEBASE

How to add soak to or reprogram a DynaTrol during a firing

Change of Program During Firing: When firing you can alter the program anytime. You must press START/STOP, then reprogram, then press “Start”. The Dynatrol will automatically take the current temperature into consideration and start back up at that point in the program. If you attempt to do this right at the end of a firing, the amount of time it takes to reprogram is not accounted for by the Dynatrol. If more than a few minutes go by, the temperature displayed may not accurately represent the amount of heat work taking place in the kiln. Another reason to fire with witness cones.