What can I do to promote even kiln firings?
Control
- Our DynaTrol or Genesis control with Dynamic Zone Control is the state-of-the-art way to do this.
Loading
- In addition, the way you load the kiln will help promote good uniform firings.
- You must keep enough space in the kiln to allow air to circulate.
- Make sure your shelves do not block elements.
Kiln Configuration
- If you are firing dense loads (such as tiles) you may want to consider one of our powered bottoms.
Venting
- A powered downdraft vent such as our Vent-Sure system will also help.
Maintenance
- Make sure all of your elements are working and are radiating heat evenly.
